Personally, i say leave as is, but IF it was even considered, also remove the keystones outside event...
People will just horde them till event time (even with a UA requirment) if left on loot table

Not popular.. i know, but i think an event zone needs to stay as an event, and something to look forward to

Mage L79 spell Incinerating Aura V - not working - 0 damage

This seems to be "effect_limit_value1" set to 0 in the spell db - should be 333 ( as previous versions are set )

also -  not that it really matters that much, it's set to 0 mana to cast -FIXED

Chief

all i can suggest is temporally disabling any firewall / antivirus and try, to help pinpoint
as i said earlier, if you have the waiting for connection box up, and the /echo commands report OFFLINE, then something on your system is blocking it

all you should need to run is the EQBCServer.exe / Macroquest.exe (as admin)
when in game, it should auto connect to 127.0.0.1 (default server address) - that would need to change if running other eq clients from other pc(s)

and you have box saying "waiting for connections on port 2112" ?

if you do, then something is blocking it
where do have installed?, dont put in a windows/program files sub folder,

/echo ${EQBC.Port}
/echo ${EQBC.Server}

try both those commands in eqchat, see what's reported in the mq chat window, see if its working

Maudigan has added another setting to the ini to help, will be easy to swap back to eqemus login if needed

Any new mq2 download will have the below settings now
ezserver=[] EZ Server - Custom Zones, Vendors, Quests, Items, etc
ezserverpeq=EZ Server - Custom Zones Vendors Quests Items etc

Chief

Sorry Draca - should have mentioned on the new build
Maud has a EZ specific build which does not include MQ2NAV, and would advice all not to use and disable if you have the standard build, we never have had it before, so nothing is lost
I have updated the link so takes you direct to the EZ Classic download

Chief- for the new build on mqemulator.net, do you know if it runs the newer macros like E3 from PEQ server?  

i have heard of it and think has been mentioned here before, but never played with it, if it is any kind of automation macro or one click does all, then it would be a no go here I'm afraid
If for some other use, then only Akka/Draca could advice if allowed here.

Chief

Hi all
Just a note on this, after speaking with Dimur (a lot)   - to use the progression tab, you will need to use the newer build of MQ2 from mqemulator.net Here
Maudigan has updated his build from a much newer source in the last month or so

This is needed as the ,(comma) Delimiter is causing issues with If checks
The newer mq2 builds allow an alternate delimiter to be used, this needs changing to the pipe symbol | in the macroquest section of the macroquest.ini
IfAltDelimiter=|

This is all thanks to Dimur, the MQ2 Guru

Another addition, optional but means you do not need to change the ProgressionTier setting, can be done by mq2
Make a folder in your mq2 folder called Configs
Put the below zoned.cfg in that folder

Each time you zone, it will change the ProgressionTier in the .ini to the zone shortname


Enjoy!
Chief

Just my update to this for now, a little bigger window for my setup
4 tabs, each with 25 items that can be checked for inventory and bank counts

Change the INI as you want, just need to add or remove whats to be tracked

No idea if just my setup, but roses from sleeper adds 1 to the inventory count, bank count is correct
Not figured that one out yet

Enjoy!
Dimurs INI Friend Window

.xml goes in your UI folder
.ini goes in your mq2/macro folder
Just a reminder


Thanks again Dimur

Chief

It will run with my EZUI, and pretty sure it would work with sars, dont think it uses the friend window for anything other than default use. I'm having a play with it, very cool

Chief
Edit, Yes it also works fine with sars, sars doesn't have a custom piece as default.

For those interested, these have been posted to the Wiki in the Repurposed Window Section
Here - Wiki UI Mods

Thanks Dimur for the links

Chief/Red

It will be down to optimizing, similar to the fighter guild issue, this will be a missing line from globalload.txt
you will need
1,1,TFTFE,GEquip,Loading Character Equipment Files
in it to see them.

These are graphic object files, if you don't load them in to memory, they wont be rendered in game

It's best to have a standard client with them all loaded so you can see everything, and a skinny client for alts while going though content to reduce load if you need to, use the standard client for general use like this so everything is visible

Chief

Thanks Draca, and thanks Mongo

That does work, its a workaround -)

With rest of raid in nexus, they get the expedition, but dont zone anywhere, only leader in SR zones to BB, others then port to SR and hail socho to port to BB

This only started (for me anyway) after the code update, prob others also

Thanks again -)
Chief

Is the T10 Expedition being looked at?, its been brought up before.

If you are grouped/raided then it ports all to dreadspire, but not on to blackburrow

The only thing that works for me is solo, but no go if grouped with even 1 other
Tried instance, same result -(

Getting socho to port all direct to BB might work -)

Thanks
Chief

Chances are its the globalload, if been changed, come across this before, if people follow the optimize guide and change, then copy the server files over, it will crash, as the file in the server files is populated (illsalina_chr.txt) probably for the defunct expedition

Chief