|
Title: BOT Elemental Quest - Not Zoning. Post by: jvii on April 27, 2011, 05:22:33 pm I did a search for this, but only came up with one answer...which I am confused on.
I just hit 65, and wanted to go to BoT to do the quest. I cannot zone in though. Just like the other person who posted the same question in these forums, the NPC says goodbye to me, but I do not go anywhere. Is there a level 70 min entrance level for this? If so, why is the NPC marked as "65-70" ? Or, are there components, etc that are needed to enter? I think I remember a quest to get into BoT from back in the day, but I thought if you were over 61(?) you could just zone in... Any help is appreciated. Title: Re: BOT Elemental Quest - Not Zoning. Post by: gimpy on April 27, 2011, 05:37:07 pm You can enter BoT at 60. The problem with BoT entry is usually related to the client you are using. Titanium / SoD / SoF have no problems, but I have heard some of the later clients do.
Title: Re: BOT Elemental Quest - Not Zoning. Post by: jvii on April 27, 2011, 07:26:24 pm I was afraid of that. Is this confirmed?
I am using Underfoot (Steam DL). That will suck if it is not accessible... :-[ Title: Re: BOT Elemental Quest - Not Zoning. Post by: lerxst2112 on April 27, 2011, 07:35:55 pm The Steam Underfoot distribution is missing several files and needs to be fixed before you can use it. There's a list here: http://www.eqemulator.net/wiki/wikka.php?wakka=UFMissingFilesList Once you have the proper zone files you can zone in just fine. Title: Re: BOT Elemental Quest - Not Zoning. Post by: jvii on April 27, 2011, 09:43:40 pm Hi lerxst, and thanks for the reply! Yes, right after I posted this thread, I saw the "Underfoot Client" thread, and gathered that there was some patching to be done. Your link to the Wiki helped a lot too!
All is good after patching/copying. By the way, your board name here absolutely rules. All the world's a stage, my friend! :) Thanks again! Title: Re: BOT Elemental Quest - Not Zoning. Post by: stad on April 28, 2011, 01:47:17 am updated following guide
http://ezserver.online/forums/index.php?topic=1943.0 (http://ezserver.online/forums/index.php?topic=1943.0) with this info |