|
Title: Bard epic twist Post by: Raygan on April 17, 2014, 09:09:00 am Ok I have spent 2 days working on trying to get bard epic to twist in with songs, without any luck. I copied my entire MQ2twist file for bard to post and see if anyone can show me what I am dong wrong here. With Mq2Twist_Damaskus properly configured, I should only need /twist 1 2 3 10...right?
So here is the entire MQ2Twist_Damaskus (I am figuring with 8.0 in mainhand I only need to concentrate on [CLICK10]:) Also would slot 13 be ammo? Maybe that would come in useful for twisting in ninja proc? [MQ2Twist] Delay=33 Quiet=0 Adjust=1 [Click_10] CastTime=0 ReCastTime=600 Name=Crystalline Assault Blade Slot=mainhand [Click_11] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_12] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_13] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_14] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_15] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_16] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_17] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_18] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED [Click_19] CastTime=0 ReCastTime=0 Name=DISABLED Slot=DISABLED Title: Re: Bard epic twist Post by: Expletus on April 17, 2014, 09:59:40 am Just so you know I had to download a new mq2 and and only swapped the mq2twist into the main folder. My twists work fine now.
Title: Re: Bard epic twist Post by: Mixlor on April 21, 2014, 05:34:09 am Ex...where did you DL the new Macroquest at? I have been trying to get this thing to work a year ago and still cant get it to work. I have the same list as Orthanos cept the Epic 6.0.
I went to mqemulator.net/downloads.php and downloaded Underfoot/Classic and hoped that was the right one since I use underfoot. Same one I have been using all along but doesn't seem to twist in the Bard Epic like others talk about. Mix Title: Re: Bard epic twist Post by: Mixlor on April 21, 2014, 05:39:34 am Actually.. I just checked the Assembly Log file in the one that I had been using was done in Jan 2012. The one I just downloaded from the same place has a assembly of Jan 26 2014. I think the problem might be fixed since they maybe uploaded a recently compiled one? Have to test it out.
Mix Title: Re: Bard epic twist Post by: Eruditeone on April 21, 2014, 05:17:15 pm Here is my bard's twist:
Code: [MQ2Twist] and a link to slot numbers. It doesnt cover ALL of them, but most. http://www.eqemulator.org/forums/showthread.php?t=9986\ Title: Re: Bard epic twist Post by: red2 on April 21, 2014, 08:31:53 pm there is also this link for slot#'s
http://www.macroquest2.com/wiki/index.php/Slot_Names Title: Re: Bard epic twist Post by: Chunka on April 21, 2014, 09:58:49 pm Link for that in the EZ guide, too......tinyurl.com/EQslots.
Title: Re: Bard epic twist Post by: Raygan on June 11, 2016, 06:49:47 am Maybe put this in the wiki....Bard epic twist in bards MQ2 twist .dll folder....
[Click_10] Cast Time=20 ReCast Time=600 Name=Disabled Slot=mainhand Then on say main toon you can have hotkey: /bct bardsname //twist 1 2 3 10 (10 is for the [Click_10] you just did in the MQ2 folder) Thanks, Xben for getting me working today! Title: Re: Bard epic twist Post by: Kelordis on June 11, 2016, 10:35:52 am Maybe put this in the wiki....Bard epic twist in bards MQ2 twist .dll folder.... Added, thanks[Click_10] Cast Time=20 ReCast Time=600 Name=Disabled Slot=mainhand Then on say main toon you can have hotkey: /bct bardsname //twist 1 2 3 10 (10 is for the [Click_10] you just did in the MQ2 folder) Thanks, Xben for getting me working today! Title: Re: Bard epic twist Post by: Goth on February 20, 2019, 09:25:45 pm ok i changed in my MQ2 Twist_Fuga - Notepad to:
[MQ2Twist] Delay=33 Quiet=0 Adjust=1 [Click_10] CastTime=20 ReCastTime=600 Name=DISABLED Slot=mainhand now when i do /bct Fuga //twist 1 2 3 10 i get: Underfined item specified (10) - ignoring (see INI file) but is is twisting the first 3 gem ... just not epic i'm running RoF2 as far as i know the updated MQ2 not sure what i'm doing wrong to get the epic to twist Title: Re: Bard epic twist Post by: Mixlor on April 12, 2019, 11:53:31 am Possibly stop and restart the mq2twist.dll plugin? the script listed above seems correct. I had to help someone with this before and I think I had them type /unload mq2twist.dll (or /plugin mq2twist.dll unload) to stop and then /plugin mq2twist.dll to restart the the plugin for it to work for them. Give that a try.
Mix Title: Re: Bard epic twist Post by: Goth on April 12, 2019, 06:51:32 pm it's correct.... for some reason i had to reboot for it to work
thanks for the reply though |